Hmmmm, I thought you already owned all the 5A Madrose in the free world....
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Need a piece of Madrose or BRW http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=8470 |
Page 1 of 1 |
| Author: | Brock Poling [ Fri Sep 15, 2006 4:06 pm ] |
| Post subject: | |
I am on the hunt to buy a piece of either 5A Madrose (you know the special grade stuff LMI used to have) or a piece of BRW with similar grain as the madrose. I need it to be about 9" x 9" and about as thick as a set of sides or a back. (A bookmatch to get this would be ok too.) I need it for a custom tele pickguard. I have quite a few really nice dark pieces of brw that would work, but they clash with the fb which is the special grade madrose and a little lighter in color.. If you can help please contact me |
|
| Author: | Dave Rector [ Sat Sep 16, 2006 12:56 am ] |
| Post subject: | |
Hmmmm, I thought you already owned all the 5A Madrose in the free world....
|
|
| Author: | Dave-SKG [ Sat Sep 16, 2006 1:51 am ] |
| Post subject: | |
Brock, A picture of what you are trying to match might help. |
|
| Author: | Brock Poling [ Sat Sep 16, 2006 2:43 am ] |
| Post subject: | |
[QUOTE=Dave Rector] Hmmmm, I thought you already owned all the 5A Madrose in the free world.... [/QUOTE]
I do have a stash, but I would prefer not to cut it from a back from one of my sets. 
In a pinch I will go with the brw I have, but I was hoping to get a better color match. I will snap a pic. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|